Abstract
Fault location and distance protection in transmission lines are essential smart grid technologies ensuring reliability of the power system and achieve the continuity of service. The objective of this chapter is to presents an accurate algorithm for estimating fault location in Extra High Voltage (EHV) transmission lines using Artificial Neural Networks (ANNs) for high speed protection. The development of this algorithm is based on disturbed transmission line models. The proposed fault protection (fault detection/classification and location) uses only the three phase currents signals at the one end of the line. The proposed technique uses five ANNs networks and consists of two steps, including fault detection/ classification and fault location. For fault detection/classification, one ANN network is used in order to identify the fault type; the fault detection/classification procedure uses the fundamental components of pre-fault and post-fault sequence samples of three phase currents and zero sequence current. For fault location, four ANNs networks are used in order to estimate the exact fault location in transmission line. Magnitudes of pre-fault and post-fault of three phase currents are used. The ANNs are trained with data under a wide variety of fault conditions and used for the fault classification and fault location on the transmission line. The proposed fault detection/classification and location approaches are tested under different fault conditions such as different fault locations, different fault resistances and different fault inception angles via digital simulation using MATLAB software in order to verify the performances of the proposed methods. The ANN-based fault classifier and locator gives high accuracy for all tests under different fault conditions. The simulations results show that the proposed scheme based on ANNs can be used for on-line fault protection in transmission line.