Abstract
We describe the interfacing of transmission line matrix models of distributed microwave circuits with lumped element models. The lumped element circuits are connected with the distributed circuit via a line guiding only its fundamental TEM mode. The distributed circuit is modeled by the transmission line matrix (TLM) method. From the method of moments foundation of TLM it follows that the electromagnetic field can be expanded in subdomain base functions. The location of the transverse boundary surface between the TLM model and the TEM line is chosen at a location where the evanescent higher modes have completely decayed. Mode matching theory is applied for computation of the scattering matrix between the TLM lines and the TEM line. The interfacing between distributed circuits and lumped element circuit is discussed for the case of a lumped nonlinear diode and a lumped element generator embedded in a microstrip circuit. The microstrip circuit is modeled via TLM whereas the lumped element models are described by the state space approach.< >