Abstract
In automatic electrocardiogram (ECG) signal analysis, the QRS onset must be identified prior to QT interval or QRS duration measurements. These measurements are decisive ECG parameters for diagnosing cardiac abnormalities among cardiologists. Hence, the efficiency of the developed automatic algorithm to detect the QRS onset is essential to obtain an accurate result of the ECG parameters. In this report, an algorithm to detect the QRS onset based on secant line slope formula is proposed. The preprocessing and wave delineation process were implemented in MATLAB using modified Pan-Tompkins algorithm (an established adaptive threshold method). The window of the preceding Q-wave was determined before calculating the slope of secant line along the descending slope for QRS onset detection. The performance of the proposed algorithm was evaluated using 25 subjects from Pusat Perubatan Universiti Kebangsaan Malaysia (PPUKM) and volunteered participants under the approval of Research and Ethics Committee, PPUKM (Code of ethics approval: FF-2013-313). All data were acquired using biosignal amplifier (g.USBamp by g.tec, Austria) with 2 minutes duration of recording and sampled at 512 Hz. The efficiency of the proposed algorithm has obtained a sensitivity of 99.67%, positive predictivity of 99.39%, and accuracy of 99.07%. The result shows stable performance and insensitivity of the proposed algorithm towards ECG wave morphology changes.