Abstract
This is a novel technique for distributed temperature measurements, using single robust ultrasonic wire or strip-like waveguides, special embodiments in the form of Helical or Spiral configurations that can cover large area/volume in enclosed regions. Such distributed temperature sensing has low cost applications in the long term monitoring critical enclosures such as containment vessels, flue gas stacks, furnaces, underground storage tanks, buildings for fire, etc. The range of temperatures that can be measured are from very low to elevated temperatures. The transduction is performed using Piezo-electric crystals that are bonded to one end of the waveguide which acts as both transmitter and receivers. The wires will have periodic reflector embodiments (bends, gratings, etc.) that allow reflections of an input ultrasonic wave, in a pulse echo mode, back to the crystal. Using the time of fight (TOF) variations at the multiple predefined reflector locations, the measured temperatures are mapped with multiple thermocouples. Using either the L(0,1) or the T(0,1) modes, or simultaneously, measurements other than temperature may also be included. This paper will describe the demonstration of this technology using a 0.5MHz longitudinal piezo-crystal for transmitting and receiving the L (0, 1) mode through the special form of waveguide at various temperatures zones. (C) 2015 The Authors. Published by Elsevier B.V.