Abstract
The 3D printing thixo-forming process is a method that utilizes semisolid thixotropic feedstock for layer extrusion by controlling feedstock viscosity below the complete melting temperature of metallic alloys to form a 3D structure. The process of producing metallic feedstock has a significant impact on alloy microstructure, which is critical for the material's printability. This study aims to propose a semisolid heat treatment processing window of Pb-40% Sn alloy for use as feedstock billets for a variety of extruder nozzles (sizes 1-3 mm) during the 3D printing thixo-forming process. Firstly, Pb-40% Sn alloys were cold deformed to reduce the specimens' diameters. Semisolid treatments for deformed specimens were performed at a variety of semisolid heating temperatures and three separate holding times (2, 5, and 10 min). The microstructure of semisolid feedstock specimens was then investigated. The temperature and time of the semisolid heating processing window of Pb-40% Sn alloy were optimized to feedstock specimens and thixo-extruding processes with different printed output sizes. Therefore, the proposed semisolid heat treatment processing window was a promising approach to pave the way for the lowcost manufacturing of AM, which yields higher printing rates and improved scalability of printed lines. Additionally, this approach allows for a versatile manufacturing route for producing 3D metal parts with maximum density and intricate geometries as a result of the ability to tailor the microstructure. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the 1st International Conference on Computations in Materials and Applied Engineering - 2021.