Abstract
This article presents a novel modified chuck wagon dinner bell shaped millimeter wave (mm-wave) antenna at 28 GHz. The proposed design has ultra-thin Rogers 5880 substrate with relative permittivity of 2.2. The design consists of T shaped resonating elements and two open ended side stubs. The desired 28 GHz frequency response is achieved by careful parametric modeling of the proposed structure. The maximum achieved single element gain at the desired resonance frequency is 3.45 dBi. The efficiency of the proposed design over the operating band is more than 88%. The impedance bandwidth achieved for -10 dB reference value is nearly 2.9 GHz. The proposed antenna is transformed into four element linear array which increases the gain up to 10.5 dBi. The fabricated prototype is tested for the measured results. It is observed that measured results closely match the simulated results. By considering its simple structure and focused radiation patterns, the proposed design is well suited for IoT (Internet of Things), mmWave microwave sensing, 5G and future RF (Radio Frequency) front-ends.