Abstract
In this paper, a compact design and new structure of bowtie antenna with dual-band characteristics for the 5G and public safety bands in intelligent transport systems (ITS) is presented. The antenna consists of a double-sided bowtie radiating patch with partial ground plane. A triangular complementary split-ring resonator (TCSRR) metamaterial (MTM) structure was etched on the radiating patch, to develop a dual band and a single notch band between 3.85 and 4.65 GHz. The proposed antenna had an overall size of 36 x 36 mm(2) and was fabricated using a FR4 substrate with a thickness and dielectric permittivity (epsilon(r)) of 1.6 mm and 4.3, respectively. CST microwave studio software was used for the design of antenna. The measured frequency results show impedance bandwidths of 3.45-3.85 GHz and 4.65-5.4 GHz, for a voltage standing wave ratio (VSWR) less than 2. The proposed antenna operates at 3.5 GHz and 4.9 GHz, providing bandwidths of 400 MHz and 750 MHz, respectively, which cover the 5G and public safety bands. A prototype was fabricated and measured based upon optimal parameters, and the experimental results showed consistency with the simulation results. The proposed antenna provided a simulated/measured gain of 5.64 dBi/5 dBi and 4 dBi/3.7 dBi at 3.5 GHz and 4.9 GHz, respectively. The enhanced bandwidth and better gain results of the proposed antenna make it an ideal candidate for an ITS operating in the 5G and public safety bands.