Abstract
Slaughterhouse wastewater (SWW) contains a significant volume of highly polluted organic wastes. These include blood, fat, soluble proteins, colloidal particles, suspended materials, meat particles, and intestinal undigested food that consists of higher concentrations of organics such as biochemical oxygen demand (BOD), chemical oxygen demand (COD), nitrogen and phosphorus hence an efficient treatment is required before discharging into the water bodies. The effluent concentrations and performance of simultaneous sequential batch biofilm reactor (SBBR) with recycled plastic carrier media support are better than the local single-stage sequential batch reactor (SBR), which is lacking in the literature in terms of COD, NH3, NO3, and PO4 treatment efficiency. The present study reports a novel strategy to remove the above mentioned contaminants using an intermittently aerated SBBR with recycled plastic carrier media support along with simultaneous nitrification and denitrification. The central composite design was evaluated to optimize the treatment performance of seven different process variables including; different alternating conditions (Oxic/anoxic) for aeration cycles (3/2 h in a 6 h cycle, 6/5 h in a 12 h cycle and 9/8 h in an 18 h cycle) and hydraulic retention time (6, 12 and 18 h). The average removal efficiencies are 94.5% for NH3, 93% for NO3 and 90.1% for PO4, and 99% for COD. The study reveals that the denitrification in the post-anoxic phase was more efficient than the pre-anoxic phase for pollutant removal and maintaining higher quality effluent. The effluent concentrations and performance of simultaneous SBBR with recycled polyethylene carrier support media were better than local SBR system in terms of COD, NH3, NO3 and PO4 treatment efficiency. Results stipulated the suitability of SBBR for wastewater treatment and reusability as a sustainable approach for wastewater management under optimum conditions.
[Display omitted]
•Sequencing batch biofilm reactor (SBBR) was used for slaughterhouse wastewater treatment.•SBBR treatment with recycled plastic bio-carriers adopting simultaneous nitrification and denitrification approaches applied.•Process optimization was performed using three level two factors central composite design (CCD) assisted RSM.•SBBR with recycled polyethylene carrier support media found better than local SBR system in treatment efficiency.•Achieved average removal efficiencies of 94.5% for NH3, 93% for NO3, 90.1% for PO4 and 99% for COD.