Abstract
Morphology of the synthesized Al-doped ZnO nanoparticles and response of developed sensor to different concentrations of CO in air.
•Preparation of Al-doped ZnO (AZO) nanoparticles.•AZO nanoparticles can be used in resistive sensors for detecting carbon monoxide (CO).•AZO-based sensors exhibit excellent sensing properties for CO detection.•Relationships between Al loading and sensing properties were established.
Al-doped ZnO (AZO) nanoparticles have been prepared using a modified sol–gel technique. The as-prepared AZO nanoparticles were annealed at 400°C, and their morphologies and microstructural characteristics were investigated using transmission electron microscopy (TEM) and x-ray powder diffraction (XRD) analyses. Crystallites with an average size of approximately 60–70nm and ZnO as a primary phase were observed in all samples. In addition, smaller nanoparticles (less than 5nm) with an Al-rich structure covering the surface of larger ZnO crystallites were also noted on the Al-doped samples.
Chemoresistive devices consisting of a thick layer of AZO nanoparticles on interdigitated alumina substrates have been fabricated, and their electrical and sensing characteristics for carbon monoxide were investigated. Al-doping provided a remarkable decrease in the electrical resistance of the sensing layer at the working temperature of the sensors (250–300°C). The sensors based on Al-doped ZnO exhibited a higher response than the pure ZnO sample, allowing the detection of CO at sub-ppm concentrations in air. The enhancement in sensing properties was discussed in terms of the characterization and electrical data.