Abstract
Laminar falling film condensations over a vertical plate with an accelerating vapor flow is analyzed in this work in the presence of condensate suction or slip effects at the plate surface. The following assumptions are made: (i) laminar condensate flow having constant properties, (ii) pure vapor with a uniform saturation temperature in the vapor region, and (iii) the shear stress at the liquid/vapor interface is negligible. The appropriate fundamental governing partial differential equations for the condensate and vapor flows (continuity, momentum, and energy equations) for the above case are identified, nondimensionalized, and transformed using nonsimilarity transformation. The transformed equations were solved using numerical, iterative, and implicit finite-difference methods. It is shown that the freestream striking angle has insignificant influence on the condensation mass and heat transfer rates, except when slip condition is present and at relatively small Grl/Re2 values. Moreover, it is shown that increasing the values of the dimensionless suction parameter (VS) results to an increase in dimensionless mass of condensate (Γ(L)/(μl Re)) and Nusselt number (Nu(L)/Re1/2). Thus, it results in an increase in condensation mass and heat transfer rates. Finally, it is found that the condensation and heat transfer rates increase as Jakob number, slip parameter, and saturation temperature increase. Finally, the results of this work not only enrich the literature of condensation but also provide additional methods for saving thermal energy.