Abstract
Wind power is one of the most quickly expanding forms of clean energy. A novel horizontal axis wind turbine type, the Archimedes Spiral Wind Turbine (ASWT), is built for residential applications. The influence of the rotor pitch to diameter ratio (2s/D) and the aerofoil blade profile on the productivity of ASWT is investigated using experimentation and computer simulation. To fulfill the validation of the experimental work, the ANSYS Fluent solver provides the numerical solution. The tests are performed on a modified ASWT with a nominal blade thickness and blade angles of α1 = 25°, α2 = 50°, and α3 = 60° for the first, middle, and third blades. Wind speeds of 8 and 10 m/s were used. The NACA4401 ASWT with (2s/D) = 0.30 is the best-studied design. At a wind speed of 10 m/s, the maximum CP of the conventional, modified, and aerofoiled ASWTs is 0.243, 0.286, and 0.3045, respectively, at tip speed ratios (λ) of 1.5, 2, and 2. Compared to the conventional and modified ASWT, the aerofoiled ASWT exhibits a 26.88% and 6.47% improvement in the peak CP.
•Experimental and numerical studies are performed for several designs of ASWT.•The influence of the rotor pitch to diameter ratio (2s/D) is investigated.•Effect of aerofoiled blade on the ASWT power output is studied.•Numerical investigation is performed by solving 3D Reynolds Navier–Stokes equations.•The aerofoiled ASWT exhibits a 26.88% and 6.47% improvement in the peak CP.