Abstract
Waterborne diseases have become one of the major public health concerns worldwide. This study is aimed to investigate and develop spatial distribution mapping of the potable water quality parameters in the city of Peshawar, Pakistan. A total of 108 water samples collected across the entire study area were subjected to physio-chemical and biological analyses. Tested parameters included pH, turbidity, temperature, fluoride concentration levels, and bacterial counts (faecal coliforms). Inverse distance weighting (IDW) interpolation in geographic information systems (GIS) was used for spatial analysis. Test results revealed that 48% of water samples had faecal coliforms count (per 100 mL) greater than World Health Organization (WHO) minimum limits, while 31% of samples had fluoride concentrations in excess of the WHO maximum guide values. Spatial distribution mapping was developed for faecal coliforms count and fluoride ion concentration using ArcGIS to highlight the high-risk settlements in the study area. Results showed that around 20% area under faecal coliforms and approximately 33% area based on fluoride concentrations fall under the need for treatment category. The pH and turbidity were found in compliance with WHO desirable limits. The sanitary inspection score significantly depicted that ineffective multi-barrier approaches consequently deteriorated the water quality at the consumer's end. Findings from the present study shall be useful to policymakers for adopting necessary remedial measures before it severely affects public health.