Abstract
The dam is a crucial water source for both consumption and irrigation in the Asir region of the Kingdom of Saudi Arabia. The current study evaluates surface water quality at the dam and examines the effects of some physicochemical and trace metals on irrigation using multiple statistical approaches. The physicochemical parameters and trace metals of the dam water were measured at 27 sites in the Asir region. Three sites were generated using the K-mean clustering technique; the first group included five sites, the second group contained 20 sites, and the third group added 2 sites. The chemical facies of the surface water were Na-K-SO42-. The surface water had low levels of Zn (0.19 mg/L), Cd (0.10 mg/L) and Pb (0.22 mg/L) except for B (38.50 mg/L), excessive concentrations of Na (2090.65 mg/L), K (535.72 mg/L), SO42- (208.11 mg/L) and Cl- (105.96 mg/L), while pH varied between 6.0 and 8.5 except at a few sites. The EC (electrical conductivity) values were within the standard for irrigation purposes. The results of irrigation water indices such as magnesium absorption ratio (MAR), magnesium hazard (MH), Kelly's ratio (KR), and soluble sodium percentage (SSP) indicate that dam water is mostly fit for irrigation except for sodium percentage (Na%) and sodium adsorption ratio (SAR). The irrigation water quality index (IWQI) values revealed that 51.85% of samples had a high suitability class and 11.11% of samples had moderate suitability, whereas the rest were low suitability for irrigation use. The redundancy analysis (RDA) biplot revealed that water pH, DO, TH, and SO42- were increased with decreased EC and salt level. The generalized linear model (GLM) model found that salt had a negative effect on the amount of Fe, Ni, Se, and Al concentrations. The study recommends that proper protective measures, including acceptable criteria for different water parameters, are required to reduce the potential influence of physicochemical parameters and metals on irrigation water in agricultural fields.