Abstract
Photonics integrated circuits and planar lightwave circuits are crucial in future high capacity optical communication networks. Such circuits can perform complicated and sophisticated signal processing functions' on-chip level. However, they should have high bandwidth in order to handle ultrafast data flow and thus achieve high-capacity transmission. One way to achieve such high bandwidth is using few-mode waveguides. Therefore, it becomes mandatory to find a way to convert from current conventional single-mode planar waveguides into few-mode waveguides, and moreover to selectively excite the desired modes within the converted multimode waveguides. In this paper, a novel silica-glass planar waveguide converter is numerically demonstrated for the first time. This device can convert in a bidirectional fashion between single-mode and two, three, or four modes planar waveguides, in addition, to selectively excite the desired mode. The device principle of operation mainly depends on spatial modes slicing and re-combining to achieve the desired higher or lower order modes. That could be accomplished by cascading stages of V-shape and M-shape graded-index planar waveguides. The graded-indices allow for flexible and simple geometrical designs that can split or combine fundamental as well as higher order modes. The finite-difference time-domain numerical method is utilized to verify the device operation and evaluate its performance for each excited mode in bidirectional directions. The device shows good performance over the entire C-band wavelength range with the worst-case magnitude of insertion-loss ≅ 3 dB, polarization-dependent loss ≅ 0.6 dB, and return-loss ≅ 21 dB. It also shows a worst-case cross-talk of ≅ −24.1 dB among the excited high-order modes in the forward direction, and a worst-case mode-rejection ratio of ≅ −23 dB for non-excited modes in the reverse direction. Moreover, the device shows reasonable performance tolerance to variations in V-shape and M-shape waveguide design parameters.