Abstract
Low nitrogen (N) utilization efficiency due to environmental N losses from fertilizers results in high-cost on-farm production. Urea coating with biodegradable polymers can prevent these losses by controlling the N release of fertilizers. We calculated N release kinetics of coated granular with various biodegradable polymeric materials and its impact on spinach yield and N uptake. Different formulations were used, (i) G-1: 10% starch + 5% polyvinyl alcohol (PVA) + 5% molasses; (ii) G-2: 10% starch + 5% PVA + 5% paraffin wax (PW); (iii) G-3: 5% gelatin + 10% gum arabic + 5% PW; (iv) G-4: 5% molasses + 5% gelatin + 10% gum arabic, to coat urea using a fluidized bed coater. The morphological and X-ray diffraction (XRD) analyses indicated that a uniform coating layer with no new phase formation occurred. In the G-2 treatment, maximum crushing strength (72.9 N) was achieved with a slowed-down N release rate and increased efficiency of 31%. This resulted in increased spinach dry foliage yield (47%), N uptake (60%) and apparent N recovery (ANR: 130%) from G-2 compared to uncoated urea (G-0). Therefore, coating granular urea with biodegradable polymers is a good choice to slower down the N release rate and enhances the crop yield and N utilization efficiency from urea.