Abstract
Reverse osmosis (RO) is considered a lifesaver technology to conquer the current catastrophic water shortage situation. However, reaching a competitive RO membrane is a challenging issue. Therefore, this study investigated the optimum polymeric blending ratio between cellulose acetate (CA) and polyvinylidene fluoride (PVDF) to have a new blended polymeric membrane named cellulose acetate polyvinyl (CAPV-X), where X is the PVDF concentration %, with enhanced properties. The optimum prepared CA/PVDF blended membrane was selected for further enhancement with nano sized metal organic framework (UiO-66 MOF). Selection was made depending on each membrane salt rejection. A membrane characterization was performed based on Fourier transform infrared (FTIR), X-ray diffractometer (XRD), scanning electron microscope, thermal gravimetric analysis, and contact angle. FTIR and XRD data confirmed the successful preparation of the blended polymeric membranes CAPV-5, CAPV-7 and CAPV-10. Further, they proved UiO-66 nanofiller impregnation in the hybrid CA/PVDF/UiO-66 membrane (CPU). The addition of PVDF and nano-MOF had a slight positive effect on the membrane thermal stability. The contact angle increased with increasing the PVDF concentration and decreased once more with the impregnation of UiO-66. The RO membrane performance revealed that the optimum CA/PVDF ratio was found to be 93/7% with around 80% salt rejection and a permeate water flux of 4 L/m(2) h. CPU composite membrane was then fabricated to enhance salt rejection and permeate water flux. The testing data indicated that salt rejection and permeate water flux increased over blended CAPV-7 membrane by almost 12% and 42%, respectively. Overall, CPU hybrid membrane could be used for water desalination with a good salt rejection of 90.2% and a permeate water flux of 5.7 L/m(2) h.
[GRAPHICS]
.