Abstract
•Usefulness of loading CuO on solar-assisted process stream was examined.•Solar-assisted process stream effectiveness was improved up to12.8%.•Flat plate collector efficiency increased owing to loading CuO nanoparticles.
Flat plate solar collectors (FPSCs) can meet the needs of low-temperature process industries by providing a hot flow stream. In this regard, the addition of nanoparticles can improve the energy-saving potential of the FPSCs. In this study, the effectiveness of using copper oxide (CuO) nanoparticles in a solar-assisted hot process stream was investigated.
Using transient-based numerical approaches, the efficacy of loading CuO nanoparticles at 0.1 vol.% into water on collector heat gain was examined. Using effectiveness–NTU method, the nanofluid efficacy was challenged by adding a two-pipe heat exchanger to diminish heating power usage in a hot process stream.
The results revealed that if a water-filled solar-assisted hot process stream was used, the energy-saving will be 670, 383 and 225 kWhm2.year at 60, 120 and 240 lithr under Najran climate conditions. Taking into account energy-saving of 712, 415.5 and 242.5kWhm2.year for nanofluid, it was found that incorporating CuO into a solar-assisted hot process stream has been successful. Owing to using CuO, the effectiveness of the solar-assisted hot process stream was improved within the range of 6-12.8%.
[Display omitted]