Abstract
Tri-
o-thymotide (I) has been used as an electroactive material in PVC (poly(vinyl chloride)) matrix for fabrication of chromium(III)-selective sensor. The membrane containing tri-
o-thymotide, sodium tetraphenyl borate (NaTPB), dibutyl phthalate (DBP) and PVC in the optimum ratio 5:1:75:100
(w/w) exhibits a working concentration range of 4.0
×
10
−6 to 1.0
×
10
−1
M with a Nernstian slope of 20.0
±
0.1
mV/decade of activity in the pH range of 2.8–5.1. The detection limit of this sensor is 2.0
×
10
−7
M. The electrode exhibits a fast response time of 15
s, shows good selectivity towards Cr
3+ over a number of mono-, bi- and trivalent cations and can also be used in partially non-aqueous medium (up to 15%, v/v) also. The assembly has been successfully used as an indicator electrode in the potentiometric titration of chromium(III) against EDTA and also to determine Cr(III) quantitatively in electroplating industry waste samples.