Abstract
The main objective of this work was to characterize and compare the microstructural and mechanical properties as well as erosion resistance of WC-12Co and WC-10Co-4Cr coatings. The High Velocity Oxy Fuel (HVOF) process was applied to carbon manganese steel API 2H typically used in oil and gas industries. Microstructural characterization of feedstock powder and coatings was conducted using scanning electron microscope (SEM), energy dispersive X-ray spectroscopic (EDS) analysis, X-ray diffraction (XRD) for phase determination, powder particle size distribution, and surface roughness measurement. The average particle size of the former powder was 13.7 mu m whereas it was 28.1 mu m for the latter. The results showed that the smaller particle size tends to melt easier than the larger one, as deduced from SEM images and surface roughness measurements. EDS and XRD results of both coatings indicated the occurrence of WC decomposition where the powder particle size plays a significant role in these results. Mechanical characterization was discussed through comparing hardness, erosion, and adhesion test results of both coatings. WC-10Co-4Cr coating exhibited higher hardness than WC-12Co as well as higher erosion resistance, due to the extent of decomposition of WC and also to carbide particle size within the coating layer; these are the same reasons for the superior adhesion strength of the former coating compared to the latter one as per ASTM Standard "C633- 13".