Abstract
The aim of this study was to determine the effectiveness of oxidation processes based on UV radiation (UV, UV/H2O2, UV/K2S2O8, and UV/Na2CO3) to remove bisphenol A (BPA) from aqueous solution. Results showed that UV radiation was not effective to remove BPA from the medium. The addition of radical promoters such as H2O2, K2S2O8, or Na2CO3 markedly increased the effectiveness of UV radiation through the generation of HO center dot, SO4 center dot-, or CO3 center dot-/HCO3 center dot radicals, respectively. The reaction rate constants between BPA and HO center dot, SO4 center dot-, and CO3 center dot-/HCO3 center dot radicals were k(HO center dot BPA) = 1.70 +/- 0.21 x 10(10) M-1 s(-1), kSO(4)(center dot-) = 1.37 +/- 0.15 x 10(9) M-1 s(-1) and kCO(3)(/HCOP3PA)(center dot-) = 3.89 +/- 0.09 x 10(6) M-1 s(-1), respectively. The solution pH had a major effect on BPA degradation with the UV/H2O2 system, followed by UV/K2S2O8, and UV/Na2CO3 systems. All oxidation systems in this study showed 100% effectiveness to remove BPA from wastewater, due to its large content of natural organic matter (NOM), which can absorb UV radiation and generate excited triplet states ((NOM)-N-3*) and various reactive oxygen species. With all three systems, the total organic carbon in the medium was markedly decreased after 5 min of treatment. The toxicity of byproducts was higher than that of BPA when using UV/H2O2, similar to that of BPA with the UV/Na2CO3 system, and lower than that of BPA after 40 mm of treatment with the UV/K2S2O8 system. (C) 2013 Elsevier B.V. All rights reserved.