Abstract
The adhesively bonded composite patch repair technique has been used to restore or extend the service life of the cracked aluminium structural components because of its efficiency. In this study, the finite element method is used to analyse the performance of the different bonded composite patches at a semicircular lateral notch and the repair of cracks emanating from this kind of notch. The knowledge of the stress distribution in the neighbourhood of the cracks is important for the analysis of their repair according to the geometry of the patch. The effects of the mechanical and geometrical properties on the variation of the stress intensity factor in the crack tip were highlighted. The effects of the adhesive properties and of the patch size on the stress intensity factor variation at the crack tip in mode I were also highlighted. The comparison between the double and single patch repairs is also given in this study. The results obtained show that the stress intensity factor of the crack tip repaired by two composite patches, is reduced to a half compared to the one that is repaired only by one patch. The orientation of fibres possessing a higher rigidity perpendicularly to the crack propagation considerably influences the reduction of the stress intensity factor. The adhesive properties must be optimised in order to increase the performance of the patch repair or the reinforcement.