Abstract
Non-metallic inclusions particles are detrimental to the mechanical properties of a material. It is very important to understand the motion behavior of inclusion particles in molten metal. The motion behavior of non-metallic inclusion particles during weld pool solidification and their distribution in joint areas is dependent on various factors. In the alternative current (AC) flash welding process, inclusions motions are dependent on welding plate movement, interfacial tensions, etc. Apart from this, the temperature of the molten metal in the welding zone and the size of inclusion particles also play an important role. Secondly, the Marangoni forces are developed due to interfacial tension which affects the movement of inclusion particles at the solid-liquid interface in a solidifying welding pool. The interfacial tension varies with the change in surfactant concentration and other factors. In this work, the effect of upsetting rate and interfacial tension on alumina inclusions has been studied. The interfacial tension controls the pushing and engulfment of non-metallic inclusions at the solid-liquid interface. A two-dimensional multiphase mathematical model has been developed to study the inclusion motion behavior at the solid-liquid interface in a solidifying weld pool. The numerical model has been developed by adding the volume of fluid method (VOF), a dynamic mesh model and discrete phase model for a realistic approach. The predicted results show that the upsetting setting parameters have a substantial effect on the overall non-metallic inclusion motion. The inclusions were seen moving away from the welded joint due to the high up-setting rate. The results also reveal that the inclusions were engulfed by the solidification front under the effect of the strong interfacial tension between the non-metallic inclusions and the molten steel.