Abstract
This study deals with the effect of the power law index on the convective heat transfer of hybrid nanofluids in a square cavity divided into three layers. The effect of a solid fluid layer is also given attention. A two-dimensional system of partial differential equations is discretized by using the generalized finite element method (FEM). A FEM having cubic polynomials (P3) is employed to approximate the temperature and velocity components, whereas the pressure is approached using quadratic finite element functions. The discretized set of equations have been solved using Newton's method. The numerical code which is used in this study has been validated by comparing with experimental findings. Mathematical simulations are performed for different sets of parameters, including the Rayleigh number (between 10(3) and 10(6)), the power law index (between 0.6 to 1.8), Darcy number (between 10(-6) to 10(-2)), undulation (between 1 and 5) and the thermal conductivity ratio (between 0.1 and 10). The results infer that a remarkable penetration of streamlines is figured out towards the porous hybrid layer as the power law index is increased. The average Nu increases with increasing Ra, and the maximum value is noted at Ra = 10(6). There is no much alteration observed for isotherms at the solid layer by increasing Da. The average Nu decreases by increasing the undulations. The rate of heat transfer is enhanced at the heated boundary and solid fluid interface of the cavity by raising the ratio of thermal conductivity.