Abstract
In this study, conjugate natural convection-conduction heat transfer in an inclined partitioned cavity filled with different nanofluids (Al2O3-water and CuO-water) on different sides of the partition is numerically investigated by using finite element method. The left and right vertical walls of the square enclosure are maintained at constant hot and cold temperatures while other wall enclosures are assumed adiabatic. Different combinations of solid nano particle volume fractions are imposed in the left and right half cavities. Numerical simulations are performed for different values of Grashof numbers (between 10(3) and 10(6)), inclination angles of the cavity (between 0 degrees and 275 degrees), partition locations (between 0.15 and 0.75), thermal conductivity ratio (between 0.01 and 10) and solid volume fraction of the nanofluids of the two cavities (between 0 and 0.04). The averaged heat transfer enhances with Grashof number and solid particle volume fraction. It is also observed that adding nanoparticles with low thermal conductivity on the right cavity is effective for the heat transfer enhancement as compared to adding nanoparticles with high thermal conductivity. As the thermal conductivity ratio of the partition increases, the averaged heat transfer rate enhances and the highest value of the thermal conductivity ratio of 10, 14.11% of averaged heat transfer enhancement is obtained when both cavities are filled with nanofluids at the highest value of nanoparticle volume fractions. (C) 2015 Elsevier B.V. All rights reserved.