Abstract
•Conjugation of silica nanoparticle (SNPs) with polymer matrix (PM) made by dissolution casting.•SEM micrographs of PM-SNPs showed uniform dispersed dense structured membranes.•PM-SNPs composite membranes improved MgSO4 salt rejection properties up to 95%.•Thermal properties augmented PM-SNPs composite membrane compared to PM membrane.
Thermally-induced phase separation (TIPS) method was used to synthesize polymer matrix (PM) membranes for reverse osmosis from cellulose acetate/polyethylene glycol (CA/PEG300) conjugated with silica nanoparticles (SNPs). Experimental data showed that the conjugation of SNPs changed the surface properties as dense and asymmetric composite structure. The results were explicitly determined by the permeability flux and salt rejection efficiency of the PM-SNPs membranes. The effect of SNPs conjugation on MgSO4 salt rejection was more significant in magnitude than on permeation flux i.e. 2.38L/m2h. FTIR verified that SNPs were successfully conjugated on the surface of PM membrane. DSC of PM-SNPs shows an improved Tg from 76.2 to 101.8°C for PM and PM-S4 respectively. Thermal stability of the PM-SNPs membranes was observed by TGA which was significantly enhanced with the conjugation of SNPs. The micrographs of SEM and AFM showed the morphological changes and increase in the valley and ridges on membrane surface. Experimental data showed that the PM-S4 (0.4wt% SNPs) membrane has maximum salt rejection capacity and was selected as an optimal membrane.