Abstract
Featured Application
Analysis of metrological velocity and temperature fields in gas flows in many areas of modern science and technology. Our Micro-Electro-Mechanical Systems (MEMS) calorimetric sensor is used in experimental studies in the field of fluid mechanics and thermodynamics, as well as in technical areas such as aerodynamics, aviation, automotive, climatology, ventilation and air conditioning, and refrigeration and heating.
Abstract In this paper, a Micro-Electro-Mechanical Systems (MEMS) calorimetric sensor with its measurement electronics is designed, fabricated, and tested. The idea is to apply a configurable voltage to the sensitive resistor and measure the current flowing through the heating resistor using a current mirror controlled by an analog feedback loop. In order to cancel the offset and errors of the amplifier, the constant temperature anemometer (CTA) circuit is periodically calibrated. This technique improves the accuracy of the measurement and allows high sensitivity and high bandwidth frequency. The CTA circuit is implemented in a CMOS FD-SOI 28 nm technology. The supply voltage is 1.2 V while the core area is 0.266 mm(2). Experimental results demonstrate the feasibility of the MEMS calorimetric sensor for measuring airflow rate. The developed MEMS calorimetric sensor shows a maximum normalized sensitivity of 117 mV/(m/s)/mW with respect to the input heating power and a wide dynamic flow range of 0-26 m/s. The high sensitivity and wide dynamic range achieved by our MEMS flow sensor enable its deployment as a promising sensing node for direct wall shear stress measurement applications.