Abstract
In this study, confined slot nano-jet impingement cooling of a hot moving surface is investigated under the combined utilization multiple rotating cylinders and magnetic field. Both convective heat transfer and entropy generation analysis are conducted using a finite element method. Parametric variation of the rotational Reynolds number (Rew between -500 and 500), velocity ratio (VR between 0 and 0.25), Hartmann number (Ha between 0 and 20) and the horizontal location of cylinders (Mx between -8 and 8) are considered. Rotation of the cylinders generally resulted in the degradation of cooling performance while increasing the wall velocity, and the horizontal location of the cylinder was found to positively contribute to this. Heat transfer rate reductions of 20% and 12.5% are obtained using rotations at the highest Rew for the case of stationary (VR = 0) and moving wall (VR = 0.25). When magnetic field at the highest strength is imposed in the rotating cylinder case, the cooling performance is increased by about 18.6%, while it is reduced by about 28% for the non-rotating cylinder case. The hot wall movement contributes, by about 14%, to the overall cooling performance enhancement. Away from the inlet location of the rotating cylinders, thermal performance improvement of 12% is obtained. The entropy generation rises with higher hot wall velocity and higher horizontal distances of the rotating cylinders, while it is reduced with a higher magnetic field for non-rotating cylinders. The best configurations in terms of cooling performance provide 8.7% and 34.2% enhancements for non-rotating and rotating cylinders compared with the reference case of (Rew, VR, Ha, Mx) = (0, 0, 0, 0), while entropy generation becomes 1% and 15% higher.