Abstract
The electrochemical behavior of nickel, Inconel 600, Incoloy 800 and 316 stainless steel electrodes in different concentration of NaOH solution was investigated using the cyclic voltammetry technique (CV). All the curves in the anodic branch of the CV are characterized by anodic dissolution peak (A), passive region (B), anodic dissolution peak (C) before oxygen evolution. In the case of the cathodic branch of CV there is one reduction peak (D) in case of Ni electrode but there are two reduction peaks (D and E) in case of the three alloys used. All these peaks are explicated. The effect of chloride ion as a pitting agent on the cyclic voltammetry and the potentiodynamic anodic polarization of Ni, Inconel 600, Incoloy 800 and 316 SS electrodes in NaOH solution was investigated. As the concentrations of the chloride ions increase the change of the amount of the anodic charge Delta(qa) increases and the values of the pitting corrosion potential are shifted to the more negative direction indicating the breakdown of passivity and the imitation of the pitting corrosion. At one and the same Cl-ion concentration, the resistance to the pitting attack decreases in the following order: 316SS > Inconel 600 > Incoloy 800> 316 SS. This order depends on the chemical composition of these alloys.