Abstract
Ti/TiN multilayered physical vapor deposition (PVD) coatings were deposited on stainless-steel by cathodic arc deposition method. Bare sample of stainless steel 304 was compared with monolithic TiN coating and TiN coating having 2, 4, 6 and 8 Ti interlayers. The properties like corrosion and wear resistance were studied and analyzed comparatively. Potentiodynamic polarization curves showed that highest corrosion resistance was indicated by TiN coating with 8 Ti interlayers. Sample having 8 Ti interlayers have high corrosion potential (Ecorr) and low corrosion current density (I-corr) as compared to other samples. This may be attributed to the arrangement of interlayers that prevents the corrosive agents to penetrate surface. All multi-layered coatings show better results than the substrate material. Pin on disk wear test revealed that coating having monolithic TiN layer have the lowest coefficient of friction and consequently have less wear volume and wear rate as compared to other coatings with Ti interlayers. These results made the investigated coated stainless steel 304 valuable for wide range of industrial applications that required wear and corrosion resistance.