Abstract
Abstract
Three new, different, simple, sensitive, and accurate methods were developed for quantitative determination of nifuroxazide (I) and drotaverine hydrochloride (II) in a binary mixture. The first method was spectrophotometry, which allowed determination of I in the presence of II using a zero-order spectrum with an analytically useful maximum at 364.5 nm that obeyed Beer's law over a concentration range of 2-10 μg/mL with mean percentage recovery of 100.08±0.61. Determination of II in presence of I was obtained by second derivative spectrophotometry at 243.6 nm, which obeyed Beer's law over a concentration range of 2-10 μg/mL with mean recovery of 99.82±1.46%. The second method was spectrodensitometry, with which both drugs were separated on a silica gel plate using chloroformacetonemethanolglacial acetic acid (6 + 3 + 0.9 + 0.1) as the mobile phase and ultraviolet (UV) detection at 365 nm over a concentration range of 0.2-1 μg/band for both drugs, with mean recoveries of 99.99 0.15 and 100.00 0.34% for I and II, respectively. The third method was reversed-phase liquid chromatography using acetonitrilewate (40 + 60, v/v; adjusted to pH 2.55 with orthophosphoric acid) as the mobile phase and pentoxifylline as the internal standard at a flow rate of 1 mL/min with UV detection at 285 nm at ambient temperature over a concentration range of 2-10 μg/mL for both drugs, with mean recoveries of 100.24±1.51 and 100.08±0.78% for I and II, respectively. The proposed methods were checked using laboratory-prepared mixtures and were successfully applied for the analysis of pharmaceutical formulations containing the above drugs with no interference from other dosage form additives. The validity of the suggested procedures was further assessed by applying the standard addition technique which was found to be satisfactory, and the percentage recoveries obtained were in accordance with those given by the EVA Pharma reference spectrophotometric method.