Abstract
Polyetheramide(PEtA) resin was synthesized by the condensation polymerization of N,N-bis(2-hydroxy ethyl) linseed oil fatty amide diol (HELA) with resorcinol. It was further treated with different percentage of toluylene 2-4-diisocyanate (TDI) to obtain the urethane modified polyetheramide resins (UPEtA). The structural elucidation of PEtA and urethane modified polyetheramide(UPEtA) were carried out by FT-IR, H-1-NMR and C-13-NMR spectroscopic techniques. These analyses confirm the formation of PEtA and UPEtA. Physico-chemical and physico-mechanical analysis were performed by standard laboratory methods. The resin composition UPEtA-24 showed best physico-mechanical properties with scratch hardness 2.0 kg, impact resistance 150 lb/in. and good bending ability. The thermal stability and curing behavior of polymers were respectively studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Thermal analysis shows that these coatings can be used safely upto 190 A degrees C. The coatings of UPEtA resins were prepared on mild steel strips. The anticorrosive behavior of UPEtA coatings were investigated in acid, alkali, water and xylene. All the coatings exhibit good chemical resistance performance in acid, alkali, saline and organic solvents, while the resin UPEtA-24 shows the best performance.