Abstract
Aluminum matrix composites (AMCs) reinforced with various ceramic particles usually exhibit poor ductility. One solution to increase ductility is the usage of hard metallic or alloy particles as reinforcements. An attempt was made to reinforce stainless steel (SS) particles to prepare AA6082/(0,6,12 and 18vol%) SS AMCs via friction stir processing (FSP). SS particles were effectively embedded in the aluminum matrix in its alloy form without any detrimental interfacial reaction. The distribution of SS particles in the composite was fairly homogenous. All regions inside the stir zone were filled with SS particles. The composite showed equiaxed fine grains due to dynamic recrystallization and pinning effect. The incorporation of SS particles enhanced the tensile strength of the composites without sacrificing ductility. A network of well developed dimples was observed on the fracture surfaces of the composites ensuring ductility.