Abstract
Lithium borate (LB) glasses doped with dysprosium oxide (Dy2O3) have been prepared by utilizing the conventional melt-quench technique. The prepared glass samples were exposed to Co-60 to check their dosimetric features and kinetic parameters. These features involve glow curves, annealing, fading, reproducibility, minimum detectable dose (MDD), and effective atomic number (Z(eff)). Kinetic parameters including the frequency factors and activation energy were also determined using three methods (glow curve analysis, initial rise, and peak shape method) and were thoroughly interpreted. In addition, the incorporation of Dy impurities into LB enhanced the thermoluminescence sensitivity similar to 170 times. The glow from LB:Dy appeared as a single prominent peak at 190 degrees C. The best annealing proceeding was obtained at 300 degrees C for 30 min. Signal stability was reported for a period of 1 and 3 months with a reduction of 26% and 31%, respectively. The proposed glass samples showed promising dosimeter properties that can be recommended for personal radiation monitoring.