Abstract
The hydraulic properties of expansive soils are affected due to the formation of visible cracks in the dry state. Chemical stabilization coupled with fiber reinforcement is often considered an effective strategy to improve the geotechnical performance of such soils. In this study, hydraulic conductivity tests have been conducted on expansive clay using two different types of fibers (fiber cast (FC) and fiber mesh (FM)) exhibiting different surface morphological properties. The fiber parameters include their dosage (added at 0.2% to 0.6% by dry weight of soil) and length (6 and 12 mm). Commercially available lime is added to ensure proper bonding between clay particles and fiber materials, and its dosage was fixed at 6% (by dry weight of the soil). Saturated hydraulic conductivity tests were conducted relying on a flexible wall permeameter on lime-treated fiber-blended soil specimens cured for 7 and 28 days. The confining pressures were varied from 50 to 400 kPa, and the saturated hydraulic conductivity values (k
sat
) were determined. For FC fibers, an increase in fiber dosage caused k
sat
values to increase by 9.5% and 94.3% for the 6 and 12 mm lengths, respectively, at all confining pressures and curing periods. For FM fibers, k
sat
values for samples mixed with 6 mm fiber increased by 12 and 99.2% for 6 and 12 mm lengths, respectively for all confining pressures at the end of the 28-day curing period. The results obtained from a flexible wall permeameter (FWP) were compared with those of a rigid wall permeameter (RWP) available in the literature, and the fundamental mechanism responsible for such variations is explained.