Abstract
As-cast and homogenization treated as-cast Al-Cu (3 mass% Cu) alloy samples were processed via high-pressure torsion (HPT) under an applied pressure of 8 GPa with 5 revolutions at room temperature. Microstructure, mechanical properties, and fracture surface morphology of the HPT-processed Al-Cu were investigated, demonstrating that the HPT process successfully resulted in distinct grain refinements in both samples. Significant improvements in the microhardness, tensile properties, and deformation homogeneity due to fine grains, high grain boundary misorientation angle, and homogeneous distribution of the theta phase were achieved after the HPT process of the homogenized sample. The homogenization treatment of the as-cast Al-Cu has a significant effect on the fracture surface morphology and fracture mode of the HPT-processed samples.