Abstract
To evaluate the effect of cleaning of metal cores from provisional cement, using an intraoral airborne-particle abrasion method, on the bond strength of permanent resin cement with cast crowns to cores.
Thirty stainless steel models of a standard complete crown tooth preparation were fabricated. Thirty Type III gold crowns were fabricated. Each cast crown corresponded to one stainless steel crown preparation model. All crowns were cemented with noneugenol zinc oxide cement and stored for 7 days at 37°C. All crowns were debonded, and the cement was cleaned with airborne-particle abrasion using 50 µm aluminum oxide at 4.1 bar (0.41 MPa) followed by ultrasonic cleaning. Based on the mechanical cleaning technique of the remaining provisional cement on surfaces of cast cores, specimens were equally divided into 3 groups: hand cleaning (HC) with a dental excavator, hand cleaning followed by polishing using a brush and pumice (BP), and hand cleaning followed by intraoral airborne-particle abrasion (APA). All crowns were then cemented to their corresponding cores using universal resin cement. All crowns were stored for 7 days at 37°C. An Instron universal testing machine was used to record the bond strength of crowns.
Airborne-particle abrasion method for intraoral mechanical cleaning revealed a statistically significantly higher bond strength compared to the other two methods.
When comparing the three methods of provisional cement cleaning from metal cores, airborne-particle abrasion resulted in the highest bond strength for cast crowns.