Abstract
The current work presents computational investigations of biogas-hydrogen blends' combustion characteristics for various thermo-physical conditions relevant for practical combustor applications. The numerical simulations were performed using 0-D SENKIN and 1-D PREMIX codes, whereas chemical kinetics is modelled using the GRI Mech 3.0 mechanism. Biogas composition represented by 60CH(4)/40CO(2)% (v/v) is blended with different H-2 concentration varying from 0 to 50% (v/v) in the fuel. The effect of initial temperature and pressure on ignition delay, laminar flame speed (S-u), flame temperature (T-ad), species concentrations (C-i), and heat release rate profiles is investigated. The results showed that GRI-Mech 3.0 predictions are in good agreement with the available experimental ignition delay data for CH4/CO2-air mixture for stoichiometric ambient condition (P = 0.1 MPa and phi = 1). For the high-temperature oxidation, GRI-Mech 3.0 has accurately predicted S-u available from literature for pure biogas (R-H = 0.0) under a wide range of equivalence ratios (phi = 0.7-1.4) for ambient conditions. The computational analysis was then extended for RH ranging from 0.0 to 0.5 over a wide range of equivalence ratio (phi) = 0.7-1.4, initial temperatures (T) = 300-600 K and initial pressures (P) = 0.1-7.0 MPa. These results obtained were used to develop a new analytical correlation for the laminar flame speed (S-u = S-u(o) (phi, R-H) (T/T-u)(alpha(phi)) (P/P-u)(beta(phi, RH)))in terms of operating conditions. The results show that hydrogen addition to the biogas improves both the flame speed and ignition delay. The extent of reduction in flame speed due to elevation of initial pressure is a linear function of hydrogen addition to biogas. Furthermore, the sensitivity analysis was studied to assess the influence of hydrogen added to the biogas using laminar flame speed sensitivity coefficient (s). The understanding of these mixtures' combustion characteristics at given initial conditions leading to feasibility conformity of optimal blends of biogas/hydrogen mixtures for the design improvement of practical combustors is discussed. (C) 2021 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.