Abstract
To evaluate the effect of surface treatments and flash-free adhesive on the shear bond strength of ceramic orthodontic brackets bonded to materials used for the fabrication of CAD/CAM provisional crowns.
Specimens (n = 160) from each provisional material (CAD-Temp and C-Temp) were categorized into four groups according to the surface treatment methods: C (no surface treatment), HP (37% H
PO
), DB (mechanical roughening by diamond bur), and SB (mechanical roughening by blasting). Maxillary central incisor ceramic brackets (Clarity™ Advanced ceramic brackets, 3 M Unitek) were bonded to the conditioned provisional materials according to the used adhesive system (n = 20), APC PLUS or APC flash-free. All specimens were evaluated for shear bond strength testing (SBS) and the adhesive remnant index (ARI). Data were analyzed using Kruskal-Wallis and Mann-Whitney U tests.
C-Temp significantly recorded higher SBS than CAD-Temp (24.0 and 16.0 MPa, respectively) (p < 0.001). DB and SB groups utilizing flash-free adhesive significantly recorded higher SBS (18.2 and 24.0 MPa, respectively) (P < 0.05) compared to other groups in the tested materials. Higher ARI scores were recorded in CAD-Temp and flash-free adhesive.
Mechanical surface treatments and flash-free adhesive would enhance SBS of ceramic orthodontic brackets to CAD/CAM provisional materials. The higher ARI scores reported with CAD-Temp and flash-free adhesive reduce chair time for excess removal.
Bonding of orthodontic brackets to provisional restorations is a challenge for orthodontists in adult comprehensive cases that could be improved by an appropriate provisional material, surface treatments, and adhesive system.