Abstract
Barium titanate (BaTiO(3)) nanopowder is synthesized using two TiO(2) powder precursors with different particle sizes and barium hydroxide via hydrothermal route. Effect of temperature, time and particle size is studied using transmission electron microscopy (TEM). scanning electron microscopy (SEM), and X-ray diffraction (XRD) techniques. Crystallite size of barium titanate is observed to decrease with increasing temperature, while morphology of obtained BaTiO3 changed from porous irregular shape at lower reaction temperature (90 degrees C) to compact facetted shape at higher reaction temperature (150 degrees C). TEM observation of low reaction temperature samples (60 degrees C) supports in situ transformation or short range dissolution-precipitation reaction mechanism. The fine grained TiO(2) (similar to 25 nm) precursor reacted faster than coarse grained TiO(2) (similar to 110-125 nm) precursor. Reaction rate may depend on size of TiO(2) precursor particles. The phase of obtained BaTiO(3) in all samples is found to be cubic. (C) 2008 Elsevier B.V. All rights reserved.