Abstract
Agglomeration is a major setback in the use of pristine multiwall carbon nanotube for many applications. Therefore, application of hydroxyl functionalized multiwall carbon nanotubes (MWCNT-OH) for the removal of naphthalene and fluorine was investigated and compared with pristine MWCNT for the first time. FTIR, BET, TGA, SEM, and TEM were used to investigate the functional group, microstructure and morphology of MWCNT and MWCNT-OH. The BET results showed more mesoporosity for MWCNT-OH than MWCNT. Batch equilibrium adsorption data were fitted to the Langmuir, Freundlich and Temkin models, of which the Langmuir model exhibited the best fit. The correlation of Langmuir model for naphthalene adsorption on MWCNT-OH was observed to be higher (i.e. R2 = 0.9703 for MWCNT-OH and R2 = 0.5082 for MWCNT) while the correlation for adsorption of flourene is higher for MWCNT (i.e. R2 = 0.998 for MWCNT and R2 = 0.9517 for MWCNT-OH). The maximum adsorption capacity (qe) for MWCNT-OH (57.401 ng/g-356.121 ng/g for naph and 61.235 ng/g - 367.361 ng/g for fluorene) was generally higher and more stable for lower concentration ranges while it is comparable with MWCNT (48.177 ng/g - 354.00 ng/g for naph and 59.635 ng/g- 366.709 ng/g for fluorene) at higher concentration. The qe calculated (344.828 ng/g for naph and 357.143 ng/g for fluorene) using PSO was observed to be much closer to experimental qe (356.121 ng/g for naph and 367.361 ng/g for fluorine) for MWCNT-OH adsorbent than MWCNT (cal qe are 384.615 ng/g for naph and 400.000 ng/g for fluorene; exp qe 354.00 ng/g for naph and 366.709 ng/g for fluorene). The value of boundary layer thickness, is >0, this indicates the reaction process is quite complex and is not solely controlled by the intra-particle diffusion. The results of this study indicate the high potential of the developed MWCNT-OH adsorbent as an efficient and successful material for the removal of carcinogenic PAHs from the water body.
•Effect of oxidation process on interaction of PAHs with CNT was investigated.•Optimization of adsorption parameters in evaluating the performance of CNT•The experimental results were fitted to Langmuir and pseudo-second-order models.