Abstract
Flux activated tungsten inert gas (ATIG) welding is a variant of tungsten inert gas (TIG) welding process with high production efficiency, high quality, low energy consumption, and low cost. The study of activating flux mechanism by increasing weld penetration has direct significance in developing flux and welding process. This study has been conducted on 430 ferritic stainless steel alloy. Design of experiment is used to get the best formulation of flux. Based on Minitab17 software, nineteen compositions of flux were prepared using the mixing method. Fluxes are combinations of three oxides (MoO3-TiO2-SiO2). Using the optimizer module available in Minitab 17 software, the best formulation was obtained to achieve the best weld depth. Hence, the obtained depth is twice greater than that achieved by conventional TIG welding. Moreover, mechanical properties and corrosion resistance have been investigated for TIG and ATIG welds respectively in tensile, impact, and hardness tests, and in potentiodynamic polarization measurement test.