Abstract
This study aims to investigate the effects on the hot cracking susceptibility of fluoride powders such as CaF2, NaF, LiF, and metal powders such as Mn, Ti, Nb and mixed Ti-Nb deposited on the 316L stainless steel during the TIG (Tungsten Inert Gas) welding process. A self-restraint hot cracking bench test using specimens of trapezoidal shape and 3 mm of thickness was selected. The obtained results of the weldability with the different powders were compared with those obtained with the conventional TIG parent-metal weld. The susceptibility to hot cracking was evaluated by the length of the crack and by the critical width at the end of the crack propagation. The formed cracks were first revealed by the liquid penetrant test, and then the surfaces of cracks were observed and analyzed by SEM-EDS-XRD tools. Among the powders tested, single Nb powder and the mixed flux of 80% Nb + 20% Ti exhibited the lowest crack length. The crack propagation ended at 22 mm of length and 30.8 mm of width. The analyses of the fracture surfaces of cracks revealed the presence of Niobium carbide (Nb2C), titanium, chromium, niobium oxide (TiO0.6Cr0.2Nb0.0202) complex compounds and cementite (Fe3C) at the interdendritic zones.