Abstract
YFeO3 (YFO) thin films were deposited onto quartz substrates via sol-gel spin-coating technique and annealed at different temperature ranged between 650 and 900 degrees C. The impact of annealing temperature on the phase formation, microstructural, optical, photoluminescence (PL) and magnetic properties of the films were systematically investigated. X-ray diffraction analysis revealed an amorphous structure in film annealed at 650 degrees C and formation of hexagonal-YFO (h-YFO) phase in films annealed at 750-800 degrees C. The films annealed at 850-900.C exhibited an orthorhombic-YFO (o-YFO) structure. Atomic force microscopy images of h-YFO films showed homogeneous surface with uniform particles size and shape. The particle size increased and had irregular shape in o-YFO films. The average particle size was 44 and 117 nm, while the root square roughness was 1.38 and 2.55 nm for h- and o-YFO films annealed at 750 and 850 degrees C, respectively. The optical band gap (Eg) was 2.53 and 2.86 eV for h- and o-YFO films annealed at 750 and 850.C, respectively. The PL spectra of h-YFO films were redshifted compared with that of o-YFO films. The PL emission related to near band edge was observed at 459.0 and 441.9 nm for h- and o-YFO films annealed at 750 and 850 degrees C, respectively. The magnetization was enhanced with the increasing of annealing temperature and has the value of 4.8 and 12.5 emu/cm(3) at 5000 Oe for h- and oYFO films annealed at 750 and 850 degrees C, respectively.