Abstract
Fire opal (SiO2 center dot nH(2)O) and diaspore [Al(OH)O] are two different precious and rare mineral species with high water content. While these species are being cut and polished to make gems, defect-induced weaknesses such as fragility, splintering, and cracking become apparent since the temperature of the mineral species may be increased to high temperatures during the process. These deformations may be broadly related to water loss (molecular (H2O) and hydroxyl (OH) group) and transformation of the base building components and/or inclusion minerals.
In this study, thermal properties and thermal stability as dehydratial behaviors of both gem quality fire opal (SiO2 center dot nH(2)O) from the Saphane region (Kutahya, Turkey) and gem quality diaspore (AlOHO) from the Milas region (Mugla, Turkey), including some associated mineral inclusions, were studied by means of X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform-Infrared absorption (FTIR) spectroscopy and thermal analysis (DTA/TGA). During heating to 1400 degrees C, DTA/TGA patterns indicated that the weight losses of the fire opal and diaspore were due to the water loss only, and that these losses occur in the temperature ranges between about 342 and 722 degrees C in fire opal, and between about 592 and 718 degrees C in diaspore. In addition, after making some corrections concerning the mass gain observed, being due to the drift with buoyancy effect of the atmosphere, in their TGA curves, the fire opal shows a mass loss of 7.942%, and one distinctive sharp endotherm at 1089.99 degrees C and seven weaker endotherms, whereas the diaspore shows a mass loss of about 13.826%, and one distinctive sharpest endotherm at 650.47 degrees C and four weaker endotherms. (C) 2010 Elsevier B.V. All rights reserved.