Abstract
Aim The aim of the present study was to evaluate shear bond strength (SBS) of LDC and resin composite in combination with phototherapy and different ceramic surface treatments.
Materials and Method: Forty Lithium Disilicate Glass Ceramic (LDC) disks measuring (4 x 4 x 9 mm) were fabricated. The specimens were randomly divided into four groups (n = 10 each) according to the surface treatment. Group 1 HF + Silane (Control); Group 2 HF + Ultrasonic bath + Silane; Group 3 SECP (Self etch ceramic primer) and Group 4 phototherapy (Er, Cr: YSGG) + Silane. On each ceramic disk a resin build-up was done. For SBS the specimens were subjected to increasing load with a transversal velocity of 1 ml/min on a universal testing machine on a ceramic resin interface. Failure mode was evaluated using digital microscope. The failure modes were divided into adhesive, cohesive and admixed interface. Data through bond strength testing was tabulated using statistical program for social science (SPSS). Means and standard deviations were compared using analysis of variance and Tukey's post hoc test (p < 0.05).
Results: The maximum and minimum bond strength was observed in group 2 [19.58(1.011)] and group 1 [17.14(1.122)] respectively. The bond strength among experimental group 1 [17.14 (1.122)] and group 4 [17.48(1.145)] were found to be comparable. Specimens in Group 2 displayed significantly higher bond strength among all experimental groups. Commonly adhesive failure mode was observed in the present study, with an incidence of 60%, 100% and 70% in groups 1,2 and 3 correspondingly.
Conclusion: Phototherapy using laser at frequency 30 Hz and 4.5 W can be used as a surface conditioner for LDC alternate to HF acid. Conditioning of LDC using Self-etch ceramic primer showed better SBS outcomes as compared to phototherapy (Er, Cr: YSGG laser).