Abstract
From the perspective of green chemistry, it is of great significance to produce cellulose nanofibers (CNFs) with more environmentally friendly and sustainable materials. This study investigated the efficient cleavage of strong hydrogen bonds occurred in sugarcane bagasse (SCB), ultrafast fabrication of CNFs through a 20 min microwave-assisted ternary carboxylic acid deep eutectic solvent (Mw-TCADES) deconstruction and sweep frequency ultrasonic (SFU) separation pretreatment. It also investigated the subsequent high-intensity ultrasonication (HIU) fibrillation process. After pretreating SCB with two different TCADES (choline chloride: oxalic acid: AlCl3 center dot 6H(2)O, and choline chloride: lactic acid: AlCl(3-)6H(2)O, molar ratio 1:1:0.2), the cellulose content of the SCB was 56.2 and 62.6%, respectively. The CNFs obtained after the two Mw-TCADES treatments contained 0.74 and 0.84 mmol/g carboxylic acid groups, and the crystallinity was 58.05 and 60.71%, respectively. Meanwhile, the CNFs obtained under the optimum treatment conditions (Mw-TCADES, 100 degrees C, 20 min and HIU) showed high thermal stability, which exhibited promising potential for further applications. Under the optimum conditions, the CNFs had a length of about 400-600 nm, width of around 15-17 nm, and a height of about 6-7 nm. The results showed that the TCADES can be used effectively as an alternative to the traditional acid-base pretreatment method and provide a green and efficient method for the utilization of lignocellulosic materials and the separation of CNFs.
[GRAPHICS]
.