Abstract
In this study, copper oxide (CuO) specimens were successfully prepared by the hydrothermal process at altered calcination temperatures; 350, 450, and 550°C. The synthesized samples were analyzed through X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman, Fourier-transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy to analyze the impact of calcination temperature on the structural, morphological, vibration spectra, functional group, and optical properties of CuO for optoelectronic device applications. XRD confirms the pure single-phase monoclinic structure of synthesized samples with no impurity phases and has good crystallinity with the development in calcination temperature. The average crystalline size, lattice constant, and porosity were found in the range of 3.98–5.06 nm;
= 3.4357 Å,
= 3.9902 Å,
= 4.8977 Å –
= 3.0573 Å,
= 3.9573 Å,
= 4.6892 Å; and 3.37–1.03%, respectively. SEM exhibited a variation in morphology by increasing calcination temperature. Raman spectra revealed that the CuO sample calcinated at 550°C with a stone-like shape having a large grain size of 3.25 μm exhibited that Raman peak intensity and the multiphonon band became stronger and sharper and exhibited higher intensity compared to the samples calcinated at 350 and 450°C. FTIR spectra confirmed that these synthesized specimens exhibited the peaks associated with the typical stretching vibrations of the Cu–O bond between 400 and 500 cm
exhibiting the formation of CuO. The energy bandgap was slightly reduced from 1.61 to 1.43 eV with the increase in the calcination temperature. The optical studies revealed that the calcination temperature of 550°C improves the optical properties of CuO by tuning its optical bandgap. The modified structural, morphological, and optical characteristics of the prepared CuO samples make them an appropriate candidate for optoelectronic device applications.