Abstract
In this work, a fast, environment-friendly and economic route was used to prepare ZnO and their nanocomposites containing reduced graphene oxide (RGO) and carbon nanotubes (CNTs) for the fabrication of dye-sensitized solar cells (DSSCs). The prepared nanostructures were wellcharacterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Raman measurements. The XRD, Raman and TEM results confirmed that the ZnO nanostructures were crystallized into the hexagonal phase, and the nanocomposites containing RGO and CNTs. Morphological studies performed by using FESEM and TEM images showed that the ZnO possessed tube-like morphology with length and diameter in the range of --1 micron and 90-200 nm, respectively, which were uniform and densely covered on the surface of the carbon materials. The DSSCs were fabricated using prepared nanostructures as a working electrode and platinum as a counter electrode with ruthenium-based dyes and iodide electrolytes. To further improve the efficiency of fabricated solar cells, nanocomposites of prepared nanostructures of ZnO with RGO and CNTs were synthesized, and their results were compared with the pristine samples. The results showed that the ZnO/CNTs (0.5 wt%) nanocomposites electrode exhibited the highest power conversion efficiency (PCE) of DSSCs with a maximum value of 0.612% compared to 0.326% of DSSC with pure ZnO, and 0.574% of DSSC with ZnO/RGO. Significantly, this technique could be used for large-scale production using the existing economical and highly effective DSSC fabrication technique.