Abstract
The durability and patient acceptability of prosthesis can be gauged by the capacity of visible light curing lab composite resins to maintain color stability through time and use. Consequently, this study's goal was to assess the color stability of three layering materials, incisal, dentin, and gingiva of SR Nexco lab composite, with exposure to coffee, Coca-Cola, and turmeric solution using a spectrophotometer. A total of 60 specimens (10 x 2 mm) of SR Nexco paste were prepared and were divided into three groups based on the layering material used. Five specimens of each group were immersed in staining solutions, namely, coffee, cola, and turmeric solution. Each group's last five specimens were submerged in distilled water (control). The incubator that housed the samples was set to 37 degrees C. The CIE L*a*b* method was used to quantify the color differences (E) of specimens using a spectrophotometer at baseline and after two weeks of immersion. Using ANOVA testing, the average color change for each specimen was examined. Tukey tests were used for post hoc comparisons. The calculated mean color difference (Delta E) for incisal ranges from 3.73 (distilled water) to 28.70 (turmeric). The mean color difference (Delta E) for dentin ranges from 2.66 (distilled water) to 41.19 (turmeric). The mean color difference (Delta E) for gingiva ranges from 1.72 (distilled water) to 23.88 (turmeric). The results are statistically significant. The maximum color difference is noted for dentin specimens, and turmeric stains all three layering materials to a maximum. The color stability of SR Nexco paste layering materials is significantly affected by the discoloring agents used. The comparison of color change between the three layering materials of SR Nexco paste (dentin, incisal, and gingiva) is statistically not significant. Turmeric solution exhibits more discoloration followed by cola and coffee solution.