Abstract
Superconductor samples of type Bi1.8Pb0.4Sr2Ca2Cu3O10+delta added with nano ZnO and Fe2O3 were synthesized by the conventional solid-state reaction technique. The samples were characterized using X-ray powder diffraction (XRD), scanning electron microscope (SEM), differential scanning calorimetry (DSC) and electrical resistivity measurements.
Excess conductivity analysis of the investigated samples was carried out as a function of temperature using Aslamazov and Larkin (AL) model. The analysis showed four different fluctuation regions namely critical (cr), three-dimensional (3D), two-dimensional (2D) and short-wave (sw). The zero temperature coherence length along c-axis, effective layer thickness of the two-dimensional system and inter-layer coupling strength were estimated as a function of nano-oxides concentration. In addition, the thermodynamics, lower and upper critical magnetic fields as well as critical current density were calculated from the Ginzburg number N (G) . It was found that the low concentration of nano-ZnO addition up to x=0.2 wt.% improved the physical properties of (Bi,Pb)-2223 phase. In contrary, these properties were deteriorated for x > 0.2. These results indicated that the addition of a low amount of nano-ZnO during the final processing of (Bi,Pb)-2223 samples can be effectively improved the flux pinning ability, while the addition of a high amount of nano-ZnO decreased the volume fraction and increased the resistance of grain boundaries. Moreover, the addition of nano-Fe2O3 had a negative effect on the superconducting parameters of the (Bi,Pb)-2223 phase. This behavior was attributed to the decrease in the volume fraction of (Bi,Pb)-2223 phase with the increasing of nano-Fe2O3.